433MHz Universal Wireless Remote Control Garage Door Electric Gate

1. Code cleaning method:

Press the unlock button and the lock button at the same time (some cases are up button and down button), after the LED light flashes three times, loosen one of the buttons while the other continues to press, then press the released button three times, the LED indicator will change to fast flashing state. At this time, all memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.

2. Copy method

One hand keeps the original remote, while another keeps the copy remote, the two remotes should be placed as close as possible (the ideal situation is to place the two remotes on the desk side by side with zero distance) , respectively press the copy button, When the LED light flashes quickly after three flashes, this copy is successful, other key operation methods are the same. Some remotes have smaller transmit power, so the original remote needs to be handed over to the copy remote to use. For the presence of noise, it must avoid interference to work, if the copy is not successful, it must be copied again after clearing the code.

Please clear the test code before copying.

Press the top 2 buttons at the same time until the LED light flashes 3 times quickly, then release one of the buttons (the other one keeps pressing), and press this button 3 times, then release the two buttons after the LED light turns on quickly. The LED light does not light up when you press a button, it means you have deleted the code.

Code study.

Press and hold a button on this remote, and also the same on your remote, close them to receive the signal 3 seconds, the LED light will flash quickly then always on, then release the button. Try to press this button, the LED light will be on, it means you have copied successfully. Do the same steps with the other buttons.

Recovery function.

If you accidentally delete the useful codes, you can press the 3 (C) and 4 (D) buttons at the same time until the LED indicator flashes quickly 3 times, then recover successfully.

Easy to use, the 4-channel remote control system lets you take control of your gadgets, car, home and garage.

This is not a complete list! If your remote uses the 433MHZ frequency, it will work with the remote duplicator (note: rolling code remotes will not work).

The original remote control IC model is 2262 2260 1527 2240 and compatible IC.

The battery used in the product is 27A 12V, please replace the battery when the remote control distance is insufficient.

Clone up to 4 remote signals from 4 different remotes.

With this remote you can control all 433MHz fixed code key fobs.

Some remotes that use this frequency are listed below.

4 Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors, Gate Doors, Alarm Systems, etc.

This is a fixed frequency (433mhz) remote cloner for copying common fixed and learning code remotes.

Cloning chip types:

2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX53 26-4,HT600, HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different chip models, provided that the digital part of the chip can be of the same model.

Scope:

The remote control is widely used, mainly used for remote control of electric retractable doors, elevators, remote control barriers, remote control sliding doors, garage doors, sliding doors, remote control LED lights, remote control fire starters, remote control passenger doors , burglar alarms, electric door alarms, MP3 motorcycle burglar alarm, etc.

Notes:

Please confirm before buying, this remote is 433mhz!